Globe

This is a 3D printable globe designed for decoration, learning, or any creative use you can think of.

The globe has a diameter of 200 mm at its original scale and includes a stand that allows it to spin. The design is simple, clean, and easy to print.

The model is split into two halves and includes alignment pins and a stand for assembly.

All files are included, and you can scale the model to fit your printer and preferences.

Print Settings:

The example print was made using:

• 0.4 mm nozzzel
• Layer height: 0.12 mm
• Scale: 75%
• Infill: 5%

These settings worked well for me, but feel free to adjust them as needed.

Assembly Guide:

Step 1:
Insert and glue the alignment pins into one half of the globe. Make sure they are fully seated and straight.

Step 2:
Apply glue to the pins and optionally along the edge. Carefully place the second half on top of the first half (the one with the pins). Make sure to align the continents correctly before pressing the parts together.

Notes:

A multi-color version is not included, as I don’t have an AMS. If you want different colors for land and water, you can paint the model or create your own multi-color setup if posseble i dont know how thst works.