Space Monster Bemstar

Printing Instructions:

• The model has many sharp angles pointing downwards. To ensure printing quality and reduce support filament, an **inverted printing** design is used, and the model comes with a few split parts.
• Inverted printing has the issue of being top-heavy and easily detaching from the build plate. Therefore, an **anchoring reinforcement structure** is added to secure the entire model. After printing, simply use flush cutters to snip off the anchor points; any small remaining anchor points can be trimmed with a hobby knife. The anchor points are mostly located on the monster's back, leaving almost no visible marks after removal.
• If some split parts become loose or cannot be secured after assembly, you can use glue to reinforce them.
• The finished product has an overall height of approximately 11.5cm, suitable for Snubbull All-Star Edition S and Wonderful Infinite series. If you need to pair it with toys like SHF, you can scale up the print (150%).
• The model is a single-color blank and needs to be painted by yourself. The monster's design is simple, making it easy to paint.

Portals (click on the image you are interested in to jump directly):