the alpha

boost for free , don't let your boost expire , boost to help me get filament

the alpha of the pack is someone to fear or is he ? 

Project: wolf.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model has been adjusted to fit on A1 mini
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Pbambulab Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Bambu Lab silver  Transmission Distance: 1
    PLA BambuLab White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to SILVER 
    At layer #20 (1.68mm) swap to White for the rest.

if you can spare the time please rate , like or follow or just collect