MTD32

cover

tempImage6SeDaF.jpg

tempImagekxBenz.jpg

tempImagen0ZBh3.jpg

plate_1.png

66bd9ec12eab9d0c.jpg

tempImageH0eL8c.jpg

tempImageAycW8C.jpg

0.16mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>🔧 Druckinformationen</h3><p><strong>Empfohlene Größe:</strong></p><ul><li>Höhe: ca. 150 mm (15 cm)</li><li>Skalierbar je nach Druckergröße</li></ul><p><strong>Support:</strong></p><ul><li>Support erforderlich (insbesondere unter Armen, Beinen, Löwenkopf und überhängenden Haarpartien)</li><li>Tree-Support wird empfohlen für saubere Oberflächen</li><li>Support nur vom Druckbett aus aktivieren</li></ul><p><strong>Druckeinstellungen (Empfehlung):</strong></p><ul><li>Schichthöhe: 0,12 – 0,2 mm</li><li>Infill: 10–15 % (Gyroid oder Grid)</li><li>Perimeter/Wände: 3</li><li>Material: PLA oder PLA+ für beste Detaildarstellung</li><li>Druckgeschwindigkeit: moderat für optimale Oberflächenqualität</li></ul><h3>🖨️ Druckausrichtung</h3><ul><li>Liegend Drucken</li><li>Rotation notwendig</li><li>Gute Haftung durch ausreichend große Bodenfläche</li></ul><h3>🎨 Nachbearbeitung</h3><ul><li>Supports  entfernen </li><li>Optional leicht anschleifen</li><li>Ideal zum Bemalen mit Acrylfarben</li><li>Auch als einfarbiger Dekodruck sehr wirkungsvoll</li></ul><h3>✨ Besonderheiten</h3><ul><li>Hohe Detailtiefe trotz kompakter Größe</li><li>Stabiler Stand durch integrierten Sockel</li><li>Ausdrucksstarke Kombination aus Figur und Tier</li><li>Perfekt als Geschenk oder Sammlerstück</li></ul><boostme><boosttitle>Boost Me</boosttitle></boostme>

<h3>🔧 Print Information</h3><p><strong>Recommended Size:</strong></p><ul><li>Height: approx. 150 mm (15 cm)</li><li>Scalable depending on printer size</li></ul><p><strong>Support:</strong></p><ul><li>Support required (especially under arms, legs, lion's head, and overhanging hair sections)</li><li>Tree support is recommended for clean surfaces</li><li>Activate support only from the print bed</li></ul><p><strong>Print Settings (Recommendation):</strong></p><ul><li>Layer height: 0.12 – 0.2 mm</li><li>Infill: 10–15 % (Gyroid or Grid)</li><li>Perimeters/Walls: 3</li><li>Material: PLA or PLA+ for best detail representation</li><li>Print speed: moderate for optimal surface quality</li></ul><h3>🖨️ Print Orientation</h3><ul><li>Print lying down</li><li>Rotation necessary</li><li>Good adhesion due to sufficiently large base area</li></ul><h3>🎨 Post-processing</h3><ul><li>Remove supports</li><li>Optionally sand lightly</li><li>Ideal for painting with acrylic paints</li><li>Also very effective as a monochrome decorative print</li></ul><h3>✨ Special Features</h3><ul><li>High level of detail despite compact size</li><li>Stable stand due to integrated base</li><li>Expressive combination of figure and animal</li><li>Perfect as a gift or collector's item</li></ul><boostme><boosttitle>Boost Me</boosttitle></boostme>

Lion Queen

ASIA

Print Profile(1)

Description

🔧 Print Information

🖨️ Print Orientation

🎨 Post-processing

✨ Special Features

Comment & Rating (0)

License

Related Models