Merlin HueForge
Print Profile(1)
Description
I haven't printed it yet due to not having my own printer, but from my experience using a friend's, printing shouldn't cause many problems.
As a general recommendation, be careful with warping in the corners, as with any hueforge and lithophane.
To print in many colors with or without an AMS, you must use the oldest technique in the book: assign several colors to the same filament and add pauses to switch between colors. With an AMS, it's simpler because while one color is printing, you can change any of the other three filament spools, even without stopping the print (Just be careful not to miss any filament changes 😅)
Everything by default, but with 100% infill.
Ideally, the printer should be calibrated, at least the flow tests for the last layer, since these will be the visible finish of the print.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)