Small ITX Case
Print Profile(2)
Description
Small itx custom compute case.
Supports:
CPU Cooler: 77mm height, im using Thermalright AXP120-X67 with normal 120 Fan not slim
GPU: 2 Slots and 255mm length
Storage: Only 2.5 inch drives. 3 Drives should fit.
Parts:
Front IO:
https://www.amazon.de/dp/B0C6DYHN87
https://www.amazon.de/gp/product/B095SDMXMK?ie=UTF8&th=1
PCIe:
https://www.amazon.de/dp/B0C416MTPT?th=1
PC Fan Screws
2 x M3 heat inserts and screws
4 x mainboard standoffs and screws
To Print the sidepanels you will need to deactivate the exclusion zone to use the full print bed.
Link: https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations
Make sure you have printed all parts.
Building instructions are attached.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)