Floating Rocket Desk Display
Print Profile(2)
Description
A retro-inspired rocket desktop display I made for my son. It hangs from a transparent line, while two 10×5 mm neodymium magnets help stabilize it and create a floating effect above the base 🚀
⚠️ NOTE ⚠️
The magnet holes are designed for a tight press fit (exactly 10 mm), so no glue is required. However, depending on the filament used, inserting the magnets may be difficult. I used an insert press to successfully install the magnets in place.
I tested scaling the model to 105% to increase the hole diameter to approximately 10.5 mm, but this resulted in the holes being too large for the magnets. If you plan to scale the model, I recommend limiting the scale to no more than 103%.
Boost Me (for free)
If you find this model useful, please consider boosting the design! It's completely free for you and really helps me continue creating practical models. Thank you for your support! 🤗
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)