Fluid Motion

Give your room a modern, architectural touch. This 3D-printed wall panel impresses with its complex, intertwined pattern, reminiscent of flowing water or organic labyrinths.

This model is a decorative wall panel in parametric design ("Fluid Style"). The curved lines create an interesting play of light and shadow.

To achieve the extreme depth as seen in the pictures, I strongly recommend a **two-color print**:

1. **Color 1 (Base/Valleys):** Black (Matte PLA recommended)
2. **Color 2 (Surface/Peaks):** Your desired color (e.g., White, Gray, Silk Gold)

By using black in the deeper layers, the natural shadow casting is artificially enhanced. This makes the relief appear much deeper and more sculptural than it actually is.

⚙️ Print Settings

• **Nozzle:** 0.4mm
• **Layer height:** 0.2mm (for speed) or 0.16mm (for finer details on curves)
• **Infill:** 10-15% (Gyroid)
• **Walls:** 2-3

• **Support:** *No support needed*

   

🖼️ Assembly

The panel is light enough for double-sided tape (e.g., Tesa Powerstrips) or can be attached with mounting adhesive. The design is tileable – print 4 pieces for a large square!