Mini mega tree
Print Profile(1)
Description
This is my mini mega tree. Print the topper and bottom with your printer and just buy a ½" piece of rebar for the stand. I used a 3' - 0" piece in the picture shown, simply use a hammer to pound the rebar into the ground. If you have snow you in your area, or softer soil, you may want it a bit longer than 3' - 0".
I used seed pixels with a 25 millimeter spacing in the picture. This would be the smallest I'd recommend but it should be fine to use larger spacings. This setup is a single string of 400 pixels in a 25 x 16 grid. I power injected on both ends of the string and limit the tree to 30% brightness in xlights.
My use for this was actually two mini singing trees, so I developed my own faces in xlights for that use. As well as using them with some simple patterns in songs that didn't use the faces.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)