Anti-static Device

Place the resistor in the groove, attach double-sided tape and single-sided conductive tape as shown in the diagram (one pin should be on the side of the double-sided tape away from the print, and the other pin should be between the single-sided conductive tape and the print), then stick it where you usually get static shocks (door handles or windows) Touch it to eliminate static electricity

PS: The resistor's pins should not extend beyond the tape's adhesive area

Usage:

A 10M ohm resistor

10mm wide single-sided conductive tape

Recommended purchase: https://e.tb.cn/h.SvRhEoQEjvuBcSs?tk=xlovfloXyLz HU108 「1/4W 1/2W 1W 2W 3W 5W Metal Film Resistors 1% Five-Color Band 22 Ohm 1K 10K 4.7K」

https://e.tb.cn/h.SvRSEDw5dGMmRB2?tk=igsCflo22L1 MF287 「Double Conductive Fabric Tape Anti-interference Shielding Tape Silver Plain Double-sided Conductive Tape Remote Control Button Repair Single-sided Conductive Tape Anti-radiation Silver-gray Plain Single-sided Adhesive Conductive Fabric」