Stackable filament rotating stand
Print Profile(2)
Description
【Boots Creation】
Thanks for the likes
When AMS is full, you can save the steps of disassembling and installing filament spools and print with this external device
It has been tested that when stacked four layers high, the printing process vibration does not affect the complete print
Note:
It is recommended to print with filament with strength no less than PLA Basic
The bottom layer does not require the base part, only from the second layer onwards is the base part needed
Snap balls please press all the way down, ensure proper installation
Installation Tutorial:
(1/4) Find the base and the locating ring, and combine them
(2/4) Find the base part, and combine it with the locating ring
(3/4) Place the ball bearings in the groove
(4/4) Cover with the tray, and press the snap balls all the way down (the model has an approximate 1.6mm gap reserved)
Boost Me (for free)
Rockets can update me🌹
Unless otherwise stated above, I use the "stabilized low-temperature print plate" for printing.
If there are printing problems, you can comment below with pictures to solve the problem together
-----------------------------------------------------------------------------------------------------------------------
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)