Logitech Webcam stand

This is my first 3D model. It's is a simple webcam stand with an integrated ¼ inch -20 screw that fits most common webcams / camera tripod threads. 

Update: Added new parts which have an included slight swivel at the top which allows backwards/forwards adjustment of the webcam angle. 

Now with optional cable clips and a metal thread option. I have added it as an additional print profile “Optional cable clips”. It is also available here: https://makerworld.com/en/models/2102805-simple-webcam-stand-v2-with-metal-thread-option#profileId-2274125

The model has the following features:

• modular assembly which allows for a height of 20, 25 or 30 centimeters
• just print the pieces you require. there is no need to print the whole set, if you only need one specific length
• integrated slot in the base for extra weights (M13 / DIN9021 washers, 2 pieces can be added)
• integrated cover with two notches that allow easy opening / placement or removal of the weights
• optional non slip pads can be added to the bottom to prevent the stand from moving
• NEW: optional version that allows the addition of a metal thread for a sturdier solution. Metal thread piece from AlieExpress: https://de.aliexpress.com/item/1005006361622408.html?spm=a2g0o.order_list.order_list_main.194.2e2e5c5fBcKoiJ&gatewayAdapt=glo2deu
• NEW: optional version that adds extra cable clips. These are printed separately and can be pushed into the provided holes
• NEW: optional swivel top parts if you need to adjust the angle of the webcam a bit. 
• New: optional decorative sleeve and updated base

My new headphone stand uses the same simple parts - you could swap either the headphone base with this base or use any mount with each base. Check it out here: https://makerworld.com/en/models/2239596-headphone-stand-with-wireless-charging-and-led#profileId-2437611

If you like the model, please feel free to rate it :)