Skull (HueForge)
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#e2dedb PLA PolyLite White Transmission Distance: 5
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#080a0d PLA PolyLite Black Transmission Distance: 0.3
This print uses 3 unique filaments
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Blue Gray
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Black for the rest.
Membership
Please join for commercial use
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)