arrow cap
Print Profile(1)
Bill of Materials
Description
Arrow Tiara
There are 3 size head pieces, small, medium, and large. You only need to print one. There are build plates for each and one plate that combines them all.
If you want to scale them to fine tune it. I suggest scaling the smaller size up. This makes sure the screw fits in.
there is a screw that attaches the two parts. It is designed for an M3x 12mm long socket head cap screw The length is not critical.
You might choose to just glue together.
The arrow has some style lines on the top and bottom surface. There is minimal print waste with a AMS. If you realy want to reduce the poop, just the the arrow to the same filament.
Another suggestion is it print the head band to a filament to match the person hair color.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)