Print Profile(1)
Description
Good day!
Since there are only vertical hydroponic systems here…here is my horizontal hydroponic system!
I have designed the two supports that hold the hydroponic tube
Items to buy for the project:
1 tube with 110 mm diameter, female on both sides
2 tube caps
1 wall pass for external trunking
1 90° bend for external trunking
1 piece of trunking to connect the wall pass and the 90° bend
1 aquarium pump
1 water oxygenation pump
1 aquarium tube
a tank to contain the water
hydroponic pots (Maker World is full of files to print them)
a bit of manual skill
As you can see from the photos, it is a very simple project to make, but it can give so much satisfaction!
When you make the hole for the water drain, do not make it in the center, so if you need to change the level you will simply have to turn the cap a little!
For any doubts, do not hesitate to comment and show me your hydroponic systems!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)