mobiobi

cover

2023-08-15_z9tz0rs6yc52.jpg

2023-08-15_y0r0jfqvnu0x.png

2023-08-15_4rswo0a9lwqw.jpg

2023-08-15_tnb9a9s53110.jpg

plate_1.png

Bean Overlord

IMG_1650.webp

plate_1.webp

0.2mm layer, 2 walls, 15% infill

Fraoch

PXL_20240218_021240543_5ad180c5-174e-4566-8971-436c4ab06a64.webp

PXL_20240218_022229599_4a4e1dcd-40fd-4333-831a-63870cf801ea.webp

PXL_20240218_022309929_da316490-bb01-459f-9ffa-5ec0bdc0ba30.webp

50% size to fit a scarf, not a shawl. Supports below the larger circle.&nbsp;0.4mm nozzle, 0.2mm layer height, 15% grid infill.

50% size, 0.2mm layer, 2 walls, 15% infill

Draghain

20241205_165825.jpg

Since this was an aesthetic piece I wanted to make sure it printed as beautiful as possible. Hence the increased settings. Added benefit is that the pin doesn't snag as much on shawl threading now.<ul><li>0.08mm layer</li><li>3 walls</li><li>15% infill</li></ul>

0.08mm layer, 3 walls, 15% infill

A fairly simple one and one a bit more stylized.Should be easy prints, here at 0.2mm layers in Polyterra peanut PLA. Just small supports under some overhangs in places will help..step/.f3d files attached.

Shawl Pins

ASIA

Print Profile(3)

Description

Comment & Rating (37)

License

Related Models