Paramore Hueforge
Print Profile(1)
Description
This is a Hueforge of Paramore singing with an orange tint to make it pop, I think it looks great.
Project: Paramore.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x99.94mm in size
You may print at higher layer heights below the Min Depth of 2.5mm
The Max Depth is 4.6mm and the Actual Depth is 4.6mm
Filaments Used:
PLA+ Esun Black Transmission Distance: 0.2
PLA+ Esun Dark Grey Transmission Distance: 0.8
PLA+ Esun Orange Transmission Distance: 5
PLA+ Esun Silver Transmission Distance: 1
PLA+ Esun Cold White Transmission Distance: 1.4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #33 (2.72mm) swap to Dark Grey
At layer #38 (3.12mm) swap to Orange
At layer #43 (3.52mm) swap to Silver
At layer #45 (3.68mm) swap to Cold White for the rest.
to print with five colours using AMS you set the white to using the black PLA and then once black is complete change the roll to white while it is continuing printing, or you can add a pause.
Boost Me (for free)
All boosts are welcomed yet never expected :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)