Search models, users, collections, and posts
P1S | PLA | 4mm Nozzle | .2 layer height | 20% infill | No Supports
Printed as expected.
Share
0
0
0
P1S | PLA | 4mm Nozzle | .2 layer height | 20% infill | Tree Supports
Printed as expected. Was able to print parts to direct the poop to a hole tucked in a corner of my desk to a trash can. Very handy as most direct the poop flat against the side or rear of the machine.
Share
0
0
0
P1S | PLA | 4mm Nozzle | .2 layer height | 50% infill | Tree Supports
Printed and works as expected.
Share
0
0
0
P1S | PLA | 4mm Nozzle | .2 layer height | 10% infill | Tree Supports
Printed as expected.
Share
0
0
0
P1S | PLA | 4mm Nozzle | .2 layer height | 10% infill | Tree Supports
Printed as expected.
Share
0
0
0
P1S | PLA | 4mm Nozzle | .2 layer height | 10% infill | Tree Supports
Printed as expected.
Share
0
0
0
No more data