Project: PERRO1.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x120mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White for the rest.