great print! came out very nice.

Came out great! I used a 0.2 nozzle and the print was on par with resin.

Very nice print. This model was very well thought out and designed top to bottom. I especially like the detail design work on the top. It fits together very well, I almost would like a slightly tighter fit personally but for my kids it is perfect. They can easily open and close it. The model was positioned perfectly, when using multi colour filament it aligns exactly right when closed. All settings chosen by the designer were great and worked very nicely with the multi colour silk filament I used. I printed the Large size, probably could have done medium for the dragons I have. The large is a nice size. The dragon pictured is the Shadowcoil printed in the slightly smaller size (the A1 mini print profile). https://makerworld.com/models/1163767 It fits with plenty of room to spare. The full-size dragon would probably fit perfectly. I printed on a P1S using Bambu lab "Neon City" silk multi color PLA. The dragon was done in Bambu lab "Onyx Black" Sparkle PLA, with "Gold" Silk eyes.

very nice print, fits my 5 year old very well.

Very nice design. It prints very clean, I printed several to use as party favors for my daughter's birthday. I printed 1 extra and set as a purge object, this reduced the total poop a bit.

Great design, small amount of filament to test bridge settings and distances. printed quite well

I really like the design of these, we'll thought out and a good size. The text is easy to change. I opted to make the large text the colour and the small the supplier (eg. bambu lab basic, sunlu silk, etc)

Very nice print. The patterns chosen for the surfaces are great especially with silk filament. I chose the small size and it fits my 4 year old well. colours I used are basic pla magenta and silk + pla gold.

Good print, came out nice!

Does it's job well. Nice print that does not use much filament. Only change I would make is a higher back and side wall, sometimes times the poop misses the box and falls behind it.

Does it's job very well. have now printed a few.

Great print, used as a gift and forgot to take a good photo of the final result, but have a screen shot. I used Gold silk+ PLA and Onyx Black Sparkle PLA. Came out very nice. Very nice clean lines

Very nice book mark! I have now printed two, one for my son and one as a gift (I unfortunately forgot to take a picture of the second one which was done in the nebula galaxy for the main and green for the inlays. But it looked great!) this has a great thickness, not too thick to use as a book mark but not so thing that it is fragile.

Great print especially for new to 3D printing users (such as myself). let's you see and feel different thickness and test how each bends and at what point it permanently deforms or breaks.

Very nice print, I chose the AMS A1 mini file (printed on P1S). it is about 1'3" (380mm) long when stretched out. The eyes look great, the photo soes not do it justice! Colours I used are Bambu labs "bambu green" and "orange"

I only had 2 colours available, but it still came out very nice! Not too much poop which is nice, but you can adjust your printer settings to reduce purge if you need to.

Good print, would be nice to have a thicker version too so it stands up easier.

Quick and easy print. No changes from base file.