After innitial “test” print from The Filament by Spectrum PETG (which is so annoying filament I cannot make reliably work - and if it work somehow after numerous calibrations and drying, it is fragile like paper sheets) I decided to split the print to 3 plates, 0.20 for frames and 0.16 for other smaller parts and found Abaflex PETG-CF Anthracite suitable as hell for this riser. Solid as diamand now. Looking forward to install LED strip (IKEA/Shelly) and upgrade my P2S with this perfect riser!

My first print on new P2S. Very nice.

Looks good and fits perfectly on V12.

Need to provide some manicure and coloring, but the base is from Aurapol PETG pistacio. Looks great.

Fits good.

Very nice wedding gift! Scaled to fit A1 mini.

Perfect! Looks like I will print dozens of these. Nimbot standard label fits the label area very well also.

Epic 10h print. Used eSun PLA-Rock filament.

This is must have for anybody with Bosch 18V batteries. Amazing model and briliant idea! Using it for my travel DC power convertor.

A brilliant idea, no screw specs makes you lost in your hardware store. For spool you need 6pcs of M3x10 (I better glue it) but connecting “wings” to the base is an issue. You need to find screw 4mm in diameter and 35mm in length with smallest head you ever imagine. I have had to use 4,8x35 torx head. Not ideal but it looks ok. Hole in the base should be thinner, not 3 but 2 in diameter and it should be fine to use more ordinary screws 🙂.