Search models, users, collections, and posts
biker santa
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.8 h
1 plate
Open in Bambu Studio
Boost
41
70
9
2
52
18
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Prima Value Light gray Transmission Distance: 4
Filafarm White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Light gray
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (9)