Search models, users, collections, and posts
.22 LR Case Loader
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
3.2 h
1 plate
Better Function (No Bridge Support)
3.4 h
1 plate
Open in Bambu Studio
Boost
365
1104
54
50
615
336
Released
Description
.22 Cartridge Sorter/Loader Assist
This is a tool I made to streamline loading .22 cartridges into my .22 case design. Loading 200 rounds one at a time gets tedious, so I came up with this to speed things up.
How It Works
- Sorting the Rounds: Pour in up to 100 rounds and lightly shake the tray. Most of the rounds will drop into place, though you may need to nudge the last few into their slots with a finger.
- Indexing: Place the indexing plate on top and shake gently side to side. The nubs on the plate align the rounds and set the spacing for loading.
- Loading: Align the tray over the case and slot the rounds in. Once they’re in place, remove the indexing plate and slide the sorting tray to the side to release the rounds. Avoid lifting the tray, as it can disrupt the alignment.
- Repeat as Needed: Reload and repeat the process for the next batch.
It’s not perfect, but it does make the process much quicker. Hopefully, it’ll save you some time if you’re working on a similar setup.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (54)