Infinity Cube
Print Profile(2)
![[P1S] 0.2mm layer, 2 walls, 15% infill, Rectilinear](https://makerworld.bblmw.com/makerworld/model/USc48173fdd2ec52/329803705/instance/2025-06-18_6c511ee9e4d9a8.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
I saw this toy on Pinduoduo and thought it was quite interesting. I tried to recreate it, mainly testing the direction of a pure printed version without any metal parts. So there will be some shaking due to the tolerance that needs to be reserved.
Precautions!!
Since there are quite a few parts to assemble, let me explain the installation method. First, although there are eight cube blocks, there are actually only two different types, so you can look at my real object picture and place them in the correct position first (the one lying flat). Then you can pre-install the pins and buckles on one side. Then, after inserting the whole thing, you can directly buckle the other side. Note that the buckles on both sides should be mirror images, with the opening direction being consistent. This is mainly for aesthetic purposes.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)