Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.2 h
1 plate
Open in Bambu Studio
Boost
22
72
10
6
46
32
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Blue Transmission Distance: 4
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #11 (0.96mm) swap to Blue
At layer #17 (1.44mm) swap to White for the rest.
If you resize the model, do so only on the X and Y axis.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (10)