Print Profile(1)
Bill of Materials
Description
Reinforced Replacement Hinge for Garden Composters
Original parts are impossible to find! I searched everywhere online to find a replacement for this specific hinge, but these parts are not sold separately. Usually, when the hinge breaks, you are forced to buy a completely new composter. That’s why I decided to design, improve, and print my own solution to save my composter and reduce waste.
This model was specifically designed, modeled, and tested to replace the original fragile hinges on the composter shown in the pictures. The factory parts often degrade due to weather exposure and become brittle over time, eventually snapping off. My redesigned version is stronger, thicker, and built to last significantly longer.
How it works:
The hinge consists of two main components:
- Part 1 (Hinge Pin): The locking pin that secures the mechanism.
- Part 2 (Eyelet): The main body that snaps into the inner side of the composter lid.
Easy Installation:
Simply snap the eyelet into the lid’s pre-existing slots and slide the hinge pin through to lock everything in place.
Material Recommendations:
- ASA: The best choice for long-term outdoor use due to its superior UV resistance.
- PETG: A great alternative that is very durable against weather impacts. I personally used PETG for the prototypes shown in the photos, and it has been holding up excellently against the elements.
Check the "Bill of Materials" section for links to the specific filaments I recommend for this project.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)