Standing Light Bar

So I desided to make a standing light bar led lamp for my desktop. And there it is.
This is the trird version, and i will update it once in awhile.
 

Parts:

• Ligt bar bottom tripod stand (variant for floor)
• Ligt bar bottom table stand
• Ligt bar bottom p2
• Ligt bar section
• Ligt bar section cover
• Ligt bar pin40
• Ligt bar pin35 (for top part)
• Ligt bar top
• Ligt bar T-clip

First of all: Printer bed size 21 sm minimum

Can be printed with PLA, PETG, ABS, if you sure that a led strip is not overhiting and plastic woudnt bend. The spase for LED strip is 15mm. 

ASSEMBLE:

• print as many sections as you want (I recomend 3 for table of max 6 for floor), connect it with pin40 and lock it with T-clips.
• for Top part use pin35 and lock it with T-clips.
• bottom part 2 connect with pin40 and T-clips.
• bottom stand also connect with pin40 and push it in bottom stand (do this after u stick LED strip at section part), it must be tight.
• if you got too long cable of small powr supply there is some empry space under bottom part.
• in descktop stand version use a screew cap to close it and fix the cable.
• last use cover part for light scattering. 

Recomended to use some glue or dichloromethane of 3d pen for stronger and stable assebly.

Added 15 sm section for A1 mini