ATARI ~ 2-Sided Round Lightbox

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Bring back the golden age of gaming with this bold Atari lightbox, featuring the instantly recognizable “Fuji” logo that defined a generation.

From arcades to living rooms, Atari helped launch the video game revolution in the late 70s and 80s. This clean, high-contrast design captures that retro energy perfectly—simple, iconic, and glowing exactly how it should.

Whether you're building out a game room, arcade setup, or just want a piece of gaming history on your wall, this one is a must-have.

Built on the Chopper Originals round lightbox system, fully compatible with all mounts and display options.

Features:
• ~224 mm diameter
• ~50 mm total thickness
• Double-sided design (visible from both directions)
• Includes wall-mount brackets
• Hollow bracket arms for hidden LED wire routing
• Designed for LED strip lighting
• Clean, even light diffusion

Installation:
The hollow wall-mount brackets allow for concealed wire routing through the arms for a clean, professional install. A hole-jig on plate 4 is included to simplify mounting.

Filaments Used:
Bambu Basic PLA – Black
Bambu Basic PLA – Jade White
Bambu Basic PLA – Red

___________________________________________________________________________________

Keywords: atari, retro, gaming, arcade, videogame, 80s, classic, nostalgia, fuji, console, gamer, lightbox, decor

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.