Print Profile(1)
Bill of Materials
Description
Trash Can Holder
- Prevents the trash can from tipping over in wind
- Easy to screw in place. 2 wood screws are all that's needed
Recommended Print Settings:
- Material: PETG or ASA
- Layer height: 0.20 mm. optionally 0.24 for faster print
- Infill: Honeycomb or Gyroid 25–40%
- Walls: 3–5
Should be printed on its side for best strength
Support Settings:
Printed with Easy PETG from Fiberlogy
- Type: Normal
- Style: Snug
- Top Z distance: 0.25
- Top interface layers: 3
- Top interface spacing: 0
- Support/object xy distance: 0.8
Parts:
- 1 - The "holder" itself
- 2 - The lock
3 - Locking pin/hinge (can optionally use an M6x60 bolt with nut instead)
Boost Me (for free)
Boost me if you like the model, more will come later :)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)