Radiator fan

Summary

Attention! New radiator fan with variable magnetic attachment available at:

https://makerworld.com/en/models/2309292-radiator-fan-v2-0-radiatorfan-v2-0

The radiator fan is an aid to improve the air circulation of a radiator. When replacing a heating system with a new low-temperature heating system, the heat circulation of the radiators is insufficient and needs to be supported by the radiator fan. The design is for double panel radiators with a distance of 7 cm. The distance between the plate fins is 6 cm. The radiator fan is attached to the bottom of the radiator and held in place by 4 glued neodymium magnets. The power supply for the fans is 12V 2A. Up to three radiator fans can be coupled together, achieving a total consumption of 1.2A with three units.

Parts list:

1x AC 100-240V to DC 12V 2A plug-in power supply
4x Fan 12V 0.1A Xilence XPF60S.W 60x60x15mm 3-pin Molex connector
2x 5.5x2.1 mm DC power socket
1x Motor speed controller
4x small cable ties
1x Self-tapping screws, M1.8 x 5 mm
1x Perfboard
4x 3-pin male header straight (Molex connector)
2x Barrel jack adapter 5.5 mm x 2.1 mm (connecting cable)
75cm Speaker cable 2x0.5mm² (connecting cable)
50cm Ribbon cable with 2 strands (socket connection)
4x Neodymium magnets 20x10x1mm

The radiator fan is a tool to improve the air circulation of a radiator. When replacing a heating system with a new low-temperature heating system, the heat circulation of the radiators is insufficient and needs to be supported by the radiator fan. The design is for double panel radiators with a distance of 7 cm. The distance between the plate fins is 6 cm. The radiator fan is attached to the bottom of the radiator and held in place by 4 glued neodymium magnets. The power supply for the fans is 12V 2A. The radiator fans can be coupled up to three units, achieving a total consumption of 1.2A with three units.

Parts list:

1x AC 100-240V to DC 12V 2A Wall Adapter
4x fan 12V 0.1A Xilence XPF60S.W 60x60x15mm 3-pin Molex connector
2x 5.5x2.1mm DC power jack
1x motor speed controller
4x small cable ties
1x self-tapping screws, M1.8 x 5 mm
1x perfboard
4x 3-pin male header straight (Molex connector)
2x barrel jack adapter 5.5 mm x 2.1 mm (connecting cable)
75 cm speaker cable 2x0.5mm² (connection cable)
50 cm ribbon cable with 2 strands (socket connection)
4x neodymium magnets 20x10x1mm

Print Settings

Printer Brand:

Anycubic

Printer:

Kobra Max

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15%

Filament: EcoLine PLA
natural