beautiful
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.63676mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ae272b PLA Generic red Transmission Distance: 6.4
#ff5500 PLA Generic orange Transmission Distance: 7.2
#ffff00 PLA Generic yellow Transmission Distance: 7.2
#e2dedb PLA PolyLite White Transmission Distance: 5
#55aaff PLA Generic sky blue Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to red
At layer #14 (0.68mm) swap to orange
At layer #20 (0.92mm) swap to yellow
At layer #25 (1.12mm) swap to White
At layer #36 (1.56mm) swap to sky blue for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)