lil cheech
Print Profile(0)
Description
Project: lil cheechs.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA Kingroon White Transmission Distance: 0
PLA Kingroon Red Transmission Distance: 4.2
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA Default White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #15 (1.28mm) swap to White
At layer #19 (1.6mm) swap to Red
At layer #29 (2.4mm) swap to Pastel Peach
At layer #33 (2.72mm) swap to White
At layer #34 (2.8mm) swap to Yellow for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)