Thank you to the designer for being as obsessed with Broadway as my daughter. Nice design but the STL contains 6-7 little pillars of black at random surrounding the logo. These no not print (too small) but, as the slicer thinks it's got to leave room for them, do leave odd little 'holes' on the final top surface. Once I got rid of those it worked perfectly!

The one I tried (the square) printed perfectly first try and (if anything) passes through itself TOO well :) Great little design.

Printed perfectly in 2 color PLA on the first try, great little tool!

Fantastic little print - hands-down this year's 'most popular' print measured by requests from my friends and family. It's very easy to accidentally snap the star off the top if you drop it though ;)

Only had to print this once and it worked as advertised but the pressure fittings on the 'petals' were a real bear to 'crack' after printing and the connecting hex posts required careful filing to loosen them up to a usable level of friction. if you can afford it, I strongly recommend the magnetic version.

Very intelligently broken apart figure - I printed with both standard supports and using PETG as a support interface and, while both worked, I found the PETG interface approach to be well worth the extra time and filament for the ease of assembly but got two usable figures. I found that his head required both a thinner layer (.08mm High Quality) and a lower speed to get a nice clean face without black or blue blotches showing through.

Printed and functioned perfectly as designed saved that the toothpick hole diameter proved too small for any of the 3 toothpick types I tried. The clicker mechanism cannot generate enough force to actually launch anything.

Printed perfectly without supports and worked exactly as expected in our blender.

Great little design, prints accurately and QUICKLY with thick enough walls to feel like it'll last a while. I enlarged the keyring hole to a diameter of 12.1mm and put a 12mm×3mm neodymium up there so it could be left on the fridge and it worked great

Prints with a high success rate

Printed beautifully in transparent PETG.

Printed great and worked perfectly (once I dealt with my own shrinkage tuning issues.) Thank you to the designer for an elegant and esthetic print which truly upscales the printer's usability!

My 95A TPU is too stiff to get any decent action out of these but they certainly fit together nicely.

Used to test Inland PETG+ as a support transition naterial for my Bambu PLA (it works a treat.)

Really well-made model -- the solo color and multicolor plate breakout saved a ton of time and filament. I only ran into a single issue (had to reposition and reprint the torso due before I got a working copy) but then everytjing fit together well and with minimum fuss.

Works perfectly, printed very quickly.

Printed in 3 colors very easily and the end result is a real crowd pleaser.

Worked perfectly, first try. Very solid design work.

A it weak with standard PLA but still work beautifully