Hi, Do you also have a messy bedroom because of watches and jewelry? This might be something for you.

Hi, Today I have the ultimate set of clamps for electrical, pneumatic, hydraulic, and other lines for you. The clamps are DIN3015 compatible, which are often used in industry and heavy machinery. Currently, the set includes printable mounting rails (from 60 to 220 mm) mounted on M6 countersunk screws, T-nuts for M6 nuts, and a set of single (SX) and double (SXX) clamps in sizes from 6 to 45 mm, including popular inch sizes.

Hi, today I have a 1:32 scale model of a metal shelter for agricultural machinery. The shelter consists of several components: a base, a supporting structure, and sheet metal. If you prefer, you can omit some of the sheet metal. Everything should be assembled with a press fit, but if it's loose, you can use glue.

A useful pack of DIN6334 extended nuts

Hello, I'm presenting a simple bale fork model, made in 1:32 scale and suitable for Universal Hobbies and Siku models. I use it with my bale model - https://makerworld.com/en/models/1904558-straw-hay-bale-different-sizes-and-scales#profileId-2041713

Hi, I recently shared with you my own models and print profiles for C-size RAM mounts. Today I'm presenting brackets and arms that work with C-size RAM mounts. These arms have 4 different lengths between slots: - Short 62.5mm - Short + 80mm - Medium - 100mm - Medium 120mm For assembly, you'll need at least an M10x60 bolt and an M10 nut. I use steel bolts because the printed bolts were too weak. For ease of use, I use a metric bolt knob, which is perfectly suited for this application.

A massive update adding a whole host of new configurations to choose from. Check it out

Hi, I'd like to share a file for printing a C-size ram mount. It has a standard round base 202U (https://rammount.com/products/ram-202u). This base configuration is the one we use at work, but other bases will be available soon.

Hello, Today I present a wheel model that includes a farm tire and a rim. It is a prototype. You can do the assembly with screws and nuts. In my DIY models I use inserts and screws. The rim with the wheel can be glued, but it is tight enough without it. The model has realistic dimensions, so you can scale it. I set it to 5% by default. 1:32 = 3,125% 1:25 = 4% 1:20 = 5%

E-clip (DIN679) for shafts. It is scalable, so you can easily adapt it to your project. (100% = 60 mm shaft diameter). You can also adjust the height of the element to your application. It is easy to use. Just press this ring into the groove and you are done. If you want to remove it, simply use a screwdriver or pliers.

It's just minimalistic spool holder, which allows you to keep filament spools in horizontal position. It's mounted with countersunk head screws.

It's easy to print ball ornament on which you can place your logo! The diameter of the ornament is 10cm. The space for the logo is 6 cm in diameter. It has a hook, so it's ready to hang immediately after printing.

This spice box was designed to keep our kitchen shelves tidy. It fits all packages with a width of less than 130mm.

This spice box was designed to keep our kitchen shelves tidy. It fits all packages with a width of less than 90mm.