Printed in PETG for more flexibility. I failed the first print, but the second attempt went smoothly (added a brim and a small support for the lower rounded corner). Great for storing my passport while keeping it safe from bending

Great design and it printed flawlessly. It fits perfectly on my radiator with no modification whatsoever. For the people complaining about bad fit, you should definitely measure your radiator first and then check the design

Came out perfect. I just had to file a little bit of the holes, because the fit was a bit too tight. I didn't print the tube since I had some 16mm PVC tube lying around that I cut at 18.1cm Next steps will be to print some more of these, add igrometeres and PTFE connectors

I had a small problem with the bigger one, but it was the allen key itself which was a bit warped. The design is perfect

Turned out great with Bambu Pla matte Blue. Thank you so much for the design!!

Printed fine with Sunlu PLA using Bambu basic PLA settings

Profile worked fine with Sunlu PLA

Awesome design, printed flawlessly with this profile. Used a little trick to print it in two colours without AMS, while still using the AMS profile downloaded here

Great design!

No brand version came out perfect

Perfect!

Scaled down to 60% and it printed without issues

Printed well, no issues

Great design, better than most others out there, since you don't have to remove the entire thing