I saw a bunch of these fidgets online with a stick and I thought it could be replaced with something more fitting. It took me a while but I came up with the Floating Benchy as first working model. I plan on creating more versions like a spider and web, or an airplane! I can't wait to hear what you think!

In this remix I altered the BRIM settings as I felt they were a little difficult to remove. I also added ironing to the supports because it made them come off easier and look a lot smoother. I changed the supports to include small overhangs because I was having an issue with the bottom curve being uneven. Finally I added a helmet cuz SAFETY FIRST!

Just a T Rex model I created using the Maker World AI Model maker from a random pic I had. Make sure you use supports and be very careful if you use the current size as the hands and head are quite smile. I would suggest scaling it up. The bigger the better.

Hey! I am a Game Designer and I am trying to take a stab at modeling for 3D printers! It is quite different and I wasn't even close to a pro when I started so its been a fun challenge. I entered my creation in my first contest and would love for you to check it out and give me your opinion! #Hostedbycreator #Contests #Springplaychallenge(Edited)

This colorful FULLY articulated jellyfish is the first model I designed right from paper to Blender to Bambu Studio. It is not the final product I am looking for, but in it's current state I believe (and I have been told by people I have shown it to) that its still pretty cool as is so I thought I would release it like this and continue updating it for all of you!!

The model this was based on worked great but I saw some issues in the comments I wanted to fix them. Added 2 608 bearings to the print plate. These work very well as a temp solution. Added a small clamp to the build plate so the model can be secured to different surfaces (Just under 3cm of clearance ) I cut a space in the model for the clamp to sit so it fits securely. If you can think of other changes that need to be made, let me know in the comments and I will do my best to accommodate!

V1 (current version) The wings print but the tolerances are tight so if you bend the wings too far they can break. (uses .16 layer height, working on a .08 version currently to see if that will help with usability I suggest using glue as some parts do not stick to the print bed reliably. DO NOT PRINT IN SILK! If it is just going to be for a standing model then it might be fine, but the current model breaks almost immediately after first use. Very brittle.

I liked the case but found that after a short while the lid would become loose and fall off easily. That was quite frustrating so i decided to take a few seconds to add space in the lid and a ball to the case that allow it to lock. I also added a space to easily lift the lid to slide it out over the ball. I will continue to add any changes I make to it in the future to keep the lid stabilized. I am also currently working on a modification that will allow for storage of larger weapons.

Found this set of Wings and absolutely loved it. The original creator did not have a print file so I printed it myself and added it.

I saw complaints on the original models that all boiled down to support. I found some 3D printed 608 Bearings (That work fantastically) to make the handles turn smoother and a small vice to adhere it to a table or surface of any kind. I cut out a hole to make it even more stable and give more room on the vice. I hope this is as useful to you in the holidays as it will be to me!

I saw complaints on the original models that all boiled down to support. I found some 3D printed 608 Bearings (That work fantastically) to make the handles turn smoother and a small vice to adhere it to a table or surface of any kind. I cut out a hole to make it even more stable and give more room on the vice. I hope this is as useful to you in the holidays as it will be to me!