🔥 FINAL KID BULMA BUILD UPDATE — SHE STANDS TALL 🔥 YOOOOOO we basically THERE now 😤💪 Kid Bulma is fully assembled and standing tall and PROUD. I only printed about 5% of the base for now just to stabilize her — and honestly… she already looking like a whole SHOWPIECE. 👀✨ Print quality came out SUPER clean across the build. Colors popping, face looking crisp, and that overall stance is just hitting different in person. Full base print coming next to finish her off properly… but I couldn’t wait — had to show how she’s already doing. 😈🔥 🧵 Filaments Used • Bambu Basic White • Bambu Basic Magenta • Bambu Basic Cyan Blue • Bambu Matte Charcoal Black • Bambu Matte Dark Brown • Bambu Silk+ Gold • Bambu Silk+ Titan Grey • CopyMaster3D Skin Tone Apricot • Polymaker Periwinkle 🧱 Build Status ✅ Full body assembled ✅ Standing stable (partial base) ⏳ Full base print remaining 🚀 Just started a 6-plate mural multicolor print… the lab never sleeps 😈🖨️ We in the FINAL FINAL stretch now… stay locked in. 💥 #BambuLab #H2C #HueForge #DragonBall #Bulma #3DPrinting #MulticolorPrint #MakerLife

😤💥 KID VEGETA UPDATE 💥😤 Y’all… he’s finally 99% DONE and he’s already DOMINATING the print room 😭🔥 The AURA this one has is actually insane… straight final boss energy. Only thing left: ✅ sand down 1 small hair tip (I lost a support mid print 😤) ✅ there was a little bit of spaghetti there, nothing crazy — just fill + sand tomorrow and we’re DONE ✅ ⚠️ ONE PROBLEM THO: This model is TOP HEAVY AS HELL 💀🤣 His hair leans so much I had to place him like this with the hair touching the wall for support 😭 Added rubber feet too so he doesn’t slide off the shelf 🙏 🧵 Filaments used: ✅ All colors / parts printed with Bambu filaments (MakerWorld) ✅ Skin tones = Copymaster3D (best skin tones on the market 😤🍑🔥) Honestly… I LOVE MY H2C 😭🔥 best toy I ever bought, no joke.

🔥🟢 LIFE-SIZE KID PICCOLO (DAIMA) – FINALLY FINISHED! 🟢🔥 Yessss… Kid Piccolo Daima is officially DONE 😤✅ Full life-size build, full H2C multicolour madness and I’m honestly speechless with how clean this turned out. And the best part? 🚫 NO filler 🚫 NO sanding 🚫 NO paint ✅ Just glue + the power of the H2C 💪🖨️ The colours are crisp, the folds look insane, and the whole statue just looks like it came straight out of the anime 😈🔥 ⚠️ Only thing I might redo… I’m probably gonna reprint the face to get rid of that nasty layer line caused by the filament running out while I was asleep 😭 When the H2C stops mid print and continues after refill… it leaves that seam and it’s lowkey bugging me 💀 Next in line… you already know… KID GOKU SSJ4 DAIMA 👀🔥 AND I already started him 😤🖨️ — the pants are printing right now as you Read This ! ! 😄🔥

🎉🔥 HAPPY NEW YEAR EVERYONE! 🔥🎉 What a year it’s been. From rough ideas to weeks and weeks — months — of late-night Blender sessions, constant refining, test prints, failures, fixes, and pushing limits… to finally seeing life-size builds standing finished in the room. This wasn’t just about hitting print. It was the daily grind — modeling, slicing, testing, learning, improving — every single day. And none of it happens in a vacuum. Huge thank you to: • Everyone printing the models on MakerWorld • Every buyer and supporter on Cults • The Patreon contributors backing the work behind the scenes • The loyal followers who’ve been here from the start • And everyone who checks in, comments, shares, or just watches the builds grow And especially — seeing all the amazing prints YOU all make with my models is truly unreal. The creativity, the scale, the finishes, the setups — big respect to every single one of you. Big love. Big thanks. 🖤🔥 Now it’s time to turn the page and start the new year the right way… 🖨️🐉 NEW YEAR = NEW PRINT 🐉🖨️ To kick things off, the next project is officially underway: 👉 Life-Size Kid Vegeta – Full Multicolor Print Same mission as always: • Clean multicolor prints • No sanding, no filler • Straight off the machine • Built for true life-size display 2026 is about bigger builds, cleaner results, and more iconic characters brought to life one layer at a time. Thank you all for being part of the journey — let’s make this year even crazier than the last. 😈🔥 More updates soon… The printers Will not Stop. 🖨️💥

🔥🐉 FIRST EVER ETSY LISTING IS LIVE 🐉🔥 Life-Size Kid Goku – 1 Meter Tall – FOR SALE This one hits different. After weeks of printing, assembling, dialing in colors, and pushing my printer to the limit, my first ever Etsy listing is officially live — and it’s not a small one. 👉 Life-Size Kid Goku (1000mm / 1 meter tall) Fully 3D printed, multi-color, modular, and built as a true collector display. This project started as a personal challenge… and ended up becoming something I’m genuinely proud of. ⚡ Build Highlights 1 meter tall life-size display Clean multi-color print (no paint on the body) Modular build with magnetic connections Sharp gi texture, glossy blues, deep black hair Minimal post-processing (only minor hair seam touch-ups) Printed and assembled on the Bambu Lab H2C, which absolutely crushed it Seeing Kid Goku standing finished was a moment. Now I’m taking the next step and putting my work out there. 🛒 LISTING IS LIVE HERE: 👉 https://www.etsy.com/listing/4433152719/life-size-dragon-ball-figure-kid-goku-3d 💬 Also curious to hear your thoughts — What do you think about the price for a life-size, fully printed display like this? Fair? High? Low? Genuinely open to feedback as I keep improving and pushing bigger builds. This is just the beginning. More builds. Bigger projects. More life-size legends. If you check it out, share it, or drop a comment — I appreciate it more than you know 🙏🔥

🔥🐉 UPDATE – LIFE-SIZE KID GOKU IS OFFICIALLY STANDING 🐉🔥 PRINT COMPLETE • ASSEMBLED • H2C ABSOLUTE DOMINATION WE MADE IT. 😤🔥 Kid Goku is finally fully printed, assembled, and standing, and I gotta say it straight: 👉 The H2C absolutely KILLED this build. 📸 Photo Update – Final Assembly These shots show Kid Goku fully upright next to Frieza, and the scale hits HARD: Perfect proportions at life size Colors locked in clean across the entire model Gi texture looks unreal at this scale Blue belt, boots, and wristbands came out crisp and glossy Zero warping, zero failures, zero drama 🧠 Finish Quality Honestly? The ONLY filler needed on this entire build is a tiny bit on the head hair seams — that’s it. Everything else: • Torso → flawless • Legs → flawless • Arms → flawless • Face → clean as hell • Color separation → nailed Straight off the H2C with minimal cleanup, which is insane for a life-size multi-part character. 🖨️ H2C PERFORMANCE (REAL TALK) This printer continues to prove itself: • Huge parts handled like nothing • Long prints stayed rock solid • AMS color swaps stayed clean • No layer shifts • No failures • No babysitting For a build of this size and complexity, that’s next-level reliability. ⚡ Build Status ✅ Legs / Pants: DONE ✅ Torso: DONE ✅ Arms: DONE ✅ Head: DONE ✅ Assembly: COMPLETE 🛠️ Minor hair touch-up left 🏆 Final display: LOCKED IN 🐉 Final Thoughts Seeing Kid Goku standing next to Frieza really shows how wild this project has become. Life-size, multi-color, clean prints, minimal post work — this is exactly how these builds SHOULD be done. More builds coming. More legends printing. The H2C isn’t slowing down till it brakes down 😈🔥

👑🧊🔥 MISSION ACCOMPLISHED – Life-Size Multicolor FRIEZA (First Form) ENDGAME REACHED • DBZ AURA MAXED • H2C ABSOLUTE UNIT Y’ALLLLLL… WE DID IT. 😤🔥 Frieza is OFFICIALLY COMPLETE (minus one final spicy upgrade 👀) and he is looking ABSOLUTELY MAGNIFICENT. The aura, the colors, the presence — straight Dragon Ball Z energy flooding the room. 🟣❄️ 🧠🟣 The Result Frieza came out CLEAN, SHARP, and INSANELY DETAILED straight off the machine. No paint. No filler. No sanding hell. Just raw multicolor perfection. Only ONE LAST PART LEFT: 👉 His hand holding a hollow energy ball, planned for RGB fusion lighting to give him that final villain flex 💥💡 That’s the cherry on top. 🖨️ FIRST-EVER Life-Size Multi-Part Print on the H2C This is my FIRST full life-size multi-part build on the H2C — and I couldn’t be happier. 💥 I skipped: • Filling • Sanding • More sanding • Priming • EVEN MORE sanding • Painting And honestly? That entire nightmare pipeline just got OBLITERATED. 💀🔥 The H2C wasted almost ZERO filament — only the purge towers took a bit, Supports next to nothing and for a project of THIS scale and complexity? That’s insane efficiency 2 parts alone had 4000k plus each filament changes those 2 alone over 8000k filament changes haha INSANE ⚙️ Lessons Learned (Important Stuff) • This Frieza was cut for 256×256×256, not H2C → If I had cut it specifically for the H2C, it would’ve been EVEN CLEANER • H2C PERFORMANCE: FLAWLESS • ZERO print failures • ONLY issue: once got stuck in a filament-change loop ↳ My fault — didn’t calibrate before starting 📌 BIG TAKEAWAY: The H2C MUST be fully calibrated before EVERY print, especially tall prints with 1,500+ filament changes. Once dialed in? It’s an absolute monster. 🐉 ⚡ Final Status ✅ Body: COMPLETE ✅ Head: COMPLETE (7 colors / 4K+ swaps survivor) ⏳ Final Hand: Coming next (RGB energy ball 👀) 🔥 Quality: INSANE 👑 Satisfaction level: Bambu Level 🔥

🌟 Life-Size Multicolor Frieza – Progress UPDATE 🌟 THIS BUILD IS GOING CRAZY. Parts 15, 16, and 17 are officially DONE 💜⚪🟣 And get this… those three parts alone took 2 DAYS + 14 HOURS to print 🤯 With OVER 4,450 FILAMENT SWAPS… absolutely insane AMS action 😂🔥 That means only Part 18 left before moving on to the energy orb and the heads / faces — and let me tell you… the heads are already looking next-level SICK. Seeing the full body coming together now — torso, arms, legs, and that massive tail — Frieza is finally taking his final form on the table. The colors, the stripes, the armor… everything is lining up perfectly with almost ZERO post-processing. Literally just remove supports and assemble 🤯 The H2C setup was honestly made for this kind of build — I swear by it. The only thing on my wish list now? 👉 A purge tower that wastes less filament — that would be the ultimate next upgrade. Next up: • Finish Part 18 • Print the energy orb • Start rotating through the interchangeable heads / faces Everything’s arrived and set up second AMS is in, H2C Vortek hot ends installed, and this monster is about to move BIG TIME 🔥🔥🔥 photos of Frieza coming to life 😄💪 More updates very soon 💪💪💪💪💪💪

locked and loaded ! ! !

Life-Size Multicolor Frieza Progress 💥 Fourth Part Printed — Flawless Again! (but I finally ran into my first little H2C glitch…) Just finished printing part 4 of my life-size multicolor Frieza — and this one came out perfect. Super clean, smooth layers, perfect color swaps, no issues at all. 🔥😄 BUT… on my third print, I finally hit my first weird hiccup with the H2C. 🛑 What happened: After about halfway through the print, the machine got stuck in a loop: cean → purge → validate flow → fail → repeat And it kept doing that every time it swapped to black on the second layer So I had to manually pause → resume over and over to push it past the loop. Super annoying, but it still finished and the part looks perfect For the next print, I restarted the machine and ran all calibrations before starting… and the problem disappeared completely. But the timelapse didn’t save for that run — strange. 🤨 Looks like the Vortex system definitely needs full calibration before each big multi-color print or it might get confused on swaps. 🔥 BUT — part 4 is flawless. And here’s the timelapse for this one — clean from start to finish! On to part 5… this Frieza is getting MASSIVE! 💜⚪🟣💛

🖨️ H2C in Action! | First Big Print Underway 💥 Live Clip: Printing Frieza’s Feet (Life-Size, Multi-Color!) Alright — here we go! The new H2C is officially breaking in, and I grabbed a clip of it working on Frieza’s life-size feet. 😂🔥 Seeing this machine move is already satisfying, but watching it lay down those massive, clean layers on a character this big? Pure printer bliss. 🔧 Vibes from this moment: • I just got the printer and it already looks like it’s been part of the battle force • Nothing beats watching a new machine carve out its first monster project • This feels like the start of a whole new level of printing chaos • If the feet look this good… the rest of Frieza is going to be absolutely wild 🔥 The H2C is officially earning its keep on day one — and Frieza is rising layer by layer. More updates coming as the print levels up!

Its The 18th Baby H2C Day Happy Pre Ordering Yall :D

🔥 PRINT ROOM UPDATE! 🔥 🖤 The Majin Has Landed – Kid Buu Mural Installed 💥 Goku Black (Rose) Mural – Progress: 5 / 24 Plates Deep 📏 Full Size: ~2000mm x 500mm | Printer: Bambu Labs A1 + AMS (4→6 Colors) The print room is officially leveling up — Kid Buu’s now watching over the battlestation in full color glory 😈 This was my first full wall install, and seeing it up there under the moody lighting just hits different. Every tile locked in perfectly, and the colors pop off the wall like an anime scene frozen mid-battle. Now, I’m knee-deep into the Goku Black mural, and this beast is going huge. 24 plates wide — nearly 2 meters of pure rage energy — this one’s going to dominate the wall as a full feature piece. Currently 5 plates printed, each one more insane than the last. Once complete, this’ll be the ultimate centerpiece for the print lab. 🧠 Build Notes: • Kid Buu printed flawlessly with 1 AMS (4 colors) — perfectly tuned for fast swaps and sharp color edges • Goku Black mural running experimental 6-color blend on one AMS — testing new palette layering for richer gradients 💬 “The lab’s coming alive — murals, machines, madness… and a lot of filament.” 🔗 Model Links MakerWorld → https://makerworld.com/en/@HoXtyYy/upload Cults3D → https://cults3d.com/en/users/HoXtyYy/3d-models Direct Model → Coming Soon 🏷️ #PrintRoomUpdate #3DPrintedWallArt #GokuBlack #KidBuu #DragonBall3D #HoXtyYy #MuralPrint #BambuLabs #AMS #FeatureWall #NewDropComing

I Just Finished printing and painting these 5 Labu Bu models! We’ve got all the colors covered — black, red, pink, green, and the Pikachu-inspired yellow version ⚡. Each one looks incredible, and I love that they’re all going out as gifts! 🖤❤️💖💚💛 These came out vibrant and full of personality — really proud of how each one turned out. Perfect little collectible masterpieces. 🌟 🔗 MakerWorld: https://makerworld.com/en/@HoXtyYy/upload 🔗 Cults3D: https://cults3d.com/en/users/HoXtyYy/3d-models 🔗 Model: https://makerworld.com/.../1679631-la-bubu-multi-part-ams... #3DPrinting #LabuBu #CollectorsEdition #CustomPaint #MakerWorld #Cults3D #MiniFigures #GiftIdeas

The Destroyer xD

FINAL UPDATE – Kid Majin Buu Has Landed! 👹💥 After a long hunt for space, I finally found the perfect spot for my Life-Size Kid Majin Buu (1550mm, 44 Parts, Dowel Connectors) — and wow, what a masterpiece he turned out to be! 🙌 Now he’s towering in my room with his energy blast lit up, watching over my gaming setup and bed. The detail and paintwork make him look way too real... I’m half-convinced he’s going to start throwing a Planet Burst at my bed while I’m sleeping 😅. ⚡ The pink glow against the marble ish wall is insane. ⚡ The scale is absolutely intimidating. ⚡ And honestly… I’ve officially run out of space (worth it though 😂). Huge thanks to who downloaded and printed the menace amazing community — this is hands-down the centerpiece of my collection next to my majin vegeta 🔗 Download Life-Size Kid Majin Buu (MakerWorld): https://makerworld.com/.../1060186-kid-majin-buu-life... 📁 Full Collection: https://makerworld.com/en/@HoXtyYy/upload 📦 Mirror Link (Cults3D): https://cults3d.com/en/users/HoXtyYy/3d-models #DragonBallZ #MajinBuu #LifeSizePrint #3DPrinting #RoomGuardian(Edited)

🚨 LIFE-SIZE KID BUU – COMPLETE 👊💥 He’s DONE. The build is finished and this monster is ready to destroy. ⚡ From head to toe, every detail is locked in: 👖 Flowing white pants with deep shading for that anime-accurate look 🌌 Two-tone skin with layered pinks & purples giving insane depth 👁️ Cold, menacing stare that cuts straight through you 🥇 Gold-detailed “M” belt gleaming against the sculpt 💡 LED Energy Orb – glowing bright with raw destruction power The proportions are on point, the stance screams chaos, and the paintwork brought it all to life. The LEDs in the raised energy blast absolutely set it over the top — glowing like he’s seconds away from erasing a planet. 🛠️ Still a couple tiny touch-ups to do, but honestly… this beast is READY. Standing here in full glory, it’s wild seeing Kid Buu at life-size — pure menace in the room. 💬 He’s left-handed, but that’s an easy flip. What matters is he’s HERE, and he’s terrifying. I love him. 💯 ⚡ Kid Buu. Life-size. Finished. Time to destroy. 🔗 Download Here (MakerWorld): makerworld.com/en/models/1060186-kid-majin-buu-life-size-3d-model 📁 Full Collection: https://makerworld.com/en/@HoXtyYy/upload 📦 Mirror Link (Cults3D): https://cults3d.com/en/users/HoXtyYy/3d-models

LIFE-SIZE KID BUU BUILD UPDATE 👊🚨 Almost there, fam!! 🔥 The top half is DONE – LEDs in the energy ball are shining 💡, magnets locked in place 🧲, torso fully painted and looking clean. Just gotta finish filling and hitting the legs with another round of paint, and then this beast is COMPLETE. Man, this one’s been a grind but seeing it come together like this is unreal. 😤 Final stretch, let’s gooooooooooooooo!!! 💯 https://www.facebook.com/61577109868095/videos/pcb.122129956148903662/752973620809096(Edited)

BUILD PROGRESS UPDATE Modded Kid Majin Buu – Custom LED Energy Ball Edition ⚡💗 Finally got the paint work started — slow but steady! 🎨 ✅ All LED wiring is now fully routed and tested ✅ Custom sculpted energy ball for his hand so it looks like Buu’s charging a massive attack ✅ more sanding more priming letssssss Goooooooooooo xD Still on the to-do list: 🔧 Heavy sanding on the legs for that smooth, clean finish 🎯 Additional priming on pants before paint 🎨 Pants & final detail painting 🛠️ Final assembly once all paint and LEDs are locked in This one’s going to hit different once that glowing energy ball is lit up and the whole figure’s pieced together.

Ryan @HoXtyYy 📢 Important Update: I’m staying on MakerWorld MakerWorld looks like they’ve finally fixed the points system issues I was having — my gift cards are now coming through steadily, which is a huge relief. With that sorted, I’m fully committed to staying here and uploading new models regularly. I’ve just had an order of 30kg of filament approved and on the way, so expect more frequent uploads and updates from me soon. Thanks to everyone who stuck around through the rough patches. I’m still here to support my existing models, answer questions, provide fixes, and take custom requests as always. On the piracy front — one seller on Etsy seems to have my Charizard model, but I recently took down a whole account on MakerWorld that had stolen models from over 30 different creators, including mine. I managed to get all those taken down. It’s a constant battle, but I’m doing my best to protect my work and others’. I’m committed to MakerWorld and this community. This is where I want to keep growing and sharing my work. While there were doubts before, now I’m focused on making things better and bringing more content your way. Thanks for your support and for being part of this journey. More models, more updates, and more good stuff coming soon. Letss Gooooooooooo ! ! !