Bird-Proof Squirrel Feeder. Designed to retain and distribute peanuts in a shell. Can be wall/fence mounted with screws, but I'm leaving mine on the ground for now.

This is a box designed to store the parts from the Modular Spirograph I uploaded last month. The hinge requires either 2x M3x28 screws to assemble or 2x M3x30 screws and 2x M3 nuts. The box closure is a friction fit with an extremely satisfying click when it seals. If you printed my spirograph, this is an essential piece of kit for storage. I've had spirograph parts littering my desk for the last month and now they finally have a place to live.

Life Counter Lid deck box &/OR replacement lid for a GameGenic SquireXL deck box. The lid has 8 numbered counter wheels to accommodate up to a four player commander game. The print profile also include a plate of Symbol wheels to track things like food, poison, treasure, tax, etc… instead of life totals.

A simple MTG commander deck box with a lid that will also fit a GameGenic SquireXL. The magnets are in the same place as the GameGenic Squire. Print in place hinge design. 24x 12mmx2mm magnets to hold everything in place. Holds 100+ double sleaved cards.

D20 - Icosahedron Jig Another jig and it's easily my favorite - The D20 - Icosahedron Jig! Just cut & foil 20 equilateral triangles, toss 'em in the jig, & solder. Add a hing on one side for a pretty box, or a jump ring on the outside to make a window hanger. You can also use glass paint & a kiln to add numbers before you solder everything. I made one with spindown numbers to hold all my magic the gathering dice.

Glass Box Jig - 90° Corner Jig Continuing the upload of my glass tools, this is a jig for making a box or anything else with a 90° corner. I designed this jig to be used with the ‘chopsticks’ included in the print profile to extend the lifetime of the part. The chopsticks provide proper corner spacing on the outside of the edges of the joint you'll be soldering. Rather than including them as a part of the jig model they are meant to be printed separately.

Glass Circle Jig - 15° This 15° jig is meant as a replacement to the 30° jig I uploaded previously. In addition to having double the number of available angles, the print profile now also includes a top jig to aid in centering and wedges to hold the glass in place. For best results, print the wedges in a flexible filament so that it can grip the glass more easily. PLA will work, but the hold won't be as sturdy.

Modular Spirograph V2 - New Parts! I updated my original modular spirograph to include two new pieces for creating turning points in the pattern. For best results be sure to use plenty of sticky tack to make certain each piece of the spirograph and the surface you're drawing on are completely stable.

2x2x0.5U Gridfinity Gluestick Holder for 6g Elmer's SchoolGlue Gluesticks

Glass Soldering Jig #2! More jigs on the way, follow me for new tools!

Construction Spatula scientifically engineered to tackle your widest spatches. Works with any spatchable substances. Instructions for use: 1: Apply Construction Spatula™ to globby substance 2: Deglob the globs by spatching them smoothly 3: ??? 4: Profit

The Jig this was remixed from was a great idea, but the slots were too narrow for thicker or uneven pieces of glass and the cutout in the center was a bit tight for soldering. I remodeled this with the gaps widened to 5mm and the center cut out made much larger for easy soldering. I also rounded off the edges of the slats and simplified the legend to a single notification of 30° flush with the surface rather than recessed. This also uses less plastic and prints faster than the original design.

This is a case designed for the Kobalt 27-piece Ratcheting Screwdriver Set. Currently $10 at Lowes. Good screwdriver that comes with a shitty case, so I made a better one. This will likely also work with many other screwdriver sets. Bits are held in place magnetically. Pause printing on layers 26 and 36 to insert 8mm magnets into the bit holes. The box is held closed magnetically as well. Glue 15mm magnets into the magnet holes after printing.

Simple spice rack for better kitchen organization. Each section holds four spice jars and is wall mountable with 2 #4 drywall screws. Designed around these spice jars from Amazon: https://tinyurl.com/3pxj2buk OnShape link if you want to make derivative works: https://tinyurl.com/3u5r2jee