Fiancée was a big fan! Used it for her birthday presents: a neclace and gift cards. I filled the empty space with printer poop for a laugh. Scaled it up 200% because why not. Butter smooth on a Supertack plate. Printed in Inland PLA Pink and Red.

Nice firm fit. The top bed slipped into the bottom and won't be going anywhere.

I had inadvertently printed some Silk PLA on a Supertack plate and it basically left behind most of the first layer. I didn't want to destroy the plate by aggressively scraping, and I didn't think dish soap and water would have been enough, so I tried this 3 times in a row and while I can still see some of the coloration from the silk filament, the plate is perfectly smooth. Pics are 2nd and 3rd attempts. Worked great, the rest should come off with soap and water.

I wasn't really considering making both type 1 phasers until I saw this model. Thank you for being an enabler! 🤣 Printed great in Inland Black PLA. I used Bambu Lab Cyan and Light Gray for the nameplate.

Needed several of these stands so my fiancée can display her "fate". We had a good laugh! These printed great and work as advertised. Printed in Inland PLA Black.

Printed my fiancée her "fate" and she had a good laugh! Printed great in Inland PLA Black and White.

Printed my fiancée her "fate" and she had a good laugh! Printed great in Inland PLA Black and White.

Printed my fiancée her "fate" and she had a good laugh! Printed great in Inland PLA Black and White.

Print came out great, but for the life of me I can't get a standard Bic Lighter to fit without destroying any decorative wrapper on it. Sent it scaled up to 101% too. It's just supposed to slide in from the top, right? Printed in Inland PLA White, Black, Green, and Purple. The color details are up top. No purge tower needed.

My fiancée absolutely loved this! She said it works better than all of her either magnet spinners. Printed in Inland PLA Purple. The bottom and top pieces come out great on the first try. The middle part did take a few tries. I want to make a print profile for this. I want to play with the angles and supports so everyone can just print this from their phones. I'm also considering a remix, carving out room for a skateboard bearing so it'll spin faster and longer.

Nice and easy print. Went with no brim, light spring, on a Supertack plate with Inland PLA Purple.

I've been surprising my fiancée with neat little 3d printed trinkets and she said this one is very awesome! I sent her your description of the pain of losing hair ties to the black hole and she said "real". So a great and practical model!

Fun little print! My 2nd ever TPU print. The part touching the support is a little rough but it does bounce! Printed with Inland TPU 95A Black fresh from the AMS dryer.

My first ever TPU print. Came out great! Wildly shiny with Inland TPU 95A Black.

Printed in Inland PETG+ Green to match everything else. Worked great! Used it for a cold pull, then my first TPU prints! Oddly fun to put together too. Lots of big chunky parts!