Search models, users, collections, and posts
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
Pioneer Maker
Print successful 144 different models and 779 hours
Print at 10mm/s on everything. 1 wall. arachne mode- If petg is bubbly extruding, try turning down the temp to the lowest reccommended for the PETG you are using due to the super slow print speed. If using PETG with glitter, you may have to go a little lower than on the spool. I optimized these for the clearest layers possible, 5 layer on each earring. Try turning up flow ratio if you are having trouble with adhesion. Try using a holo special effects plate for that “crystal” look.
transparent celestial earrings
1
8
Share
0
0
0
I love printing thick layers with my 0.8mm nozzle so I thought I would create something a little different to print!
transparent celestial earrings
1
8
Share
0
0
0
I scaled down to 65% and it printed near perfect except for the chain (my fault) I should have enabled supports. enabling tree supports for the scaled down version worked!
Share
0
0
0
No more data