This was definitely the most challenging print I’ve done so far, in a good way. The model looks excellent and is very well designed. I did run into some issues printing the fan components, but slowing down the print speed and acceleration helped significantly. I also enabled automatic brims, which improved adhesion and overall print success. Filaments used: PLA Basic – Jade White PLA Silk+ – Grey PLA Basic – Black PLA Metal – Gold Thank you for sharing this model with the community. It was a great project and a rewarding print.

Very good, and it fits perfectly on the P2S. I printed in ASA for extra sturdiness.

It is a cool design, but in terms of functionality, it needs some improvement. The cable loop underneath the base is extremely tight, and the base does not clip onto the lampshade, so it does not attach securely.

Very sleek. The wait to print was well worth it.

Looks nice.

Best print I’ve done so far, congratulations to the maker. The design is truly impressive and prints beautifully. I did encounter a few opportunities for improvement, which I applied to my own build. I designed a rear panel and a battery holder, which I believe greatly improves the overall aesthetics, especially for those who, like me, don’t plan to display it exclusively on a shelf. Once again, thank you for sharing this design. It’s genuinely outstanding. Filaments used: Bambu Lab: PLA Basic – Gray (10103) PLA Basic – Black (10101) PLA Matte – Latte Brown (11800) Elegoo: PLA Wood – Teakwood PLA Marble – Brick Red

Printed well with PLA Basic

Good model. However some diamonds got stuck on the tray for it being a little tight.

It is good. But i bit too light in weight what makes a little annoying when taking the phone out.

I printed the divider only. Turned out good

Nice

Really nice. 100% recommended.

Nice

A little too bulky, but turned out ok.