dandoe

cover

IMG_0504.jpeg

IMG_0505.jpeg

plate_1.png

2024-12-31_afcc1284e47be.jpeg

this is printed with the standard .20mm setting in Bambu slicer. I left the open areas in the bottom to cut down on material used and to add some storage area. There is a lip in the back that prevents the charging block from sliding out the back. It is a snug fit.  fixed the back, I forgot that it had some parts sticking out.

0.2mm layer, 2 walls, 15% infill

This is a version with thinner dividers to make more room for thicker cases and such.

0.2mm layer, 3 walls, 15% infill

Tricky-printer

IMG_4264[1].JPG

IMG_4263[1].JPG

IMG_4266[1].JPG

IMG_4265[1].JPG

Make sure to remove the black pads from the bottom, in order for it to it!.2mm layer height .4mm nozzle8hr 33min print timeuses 400g of filament&nbsp;

Fixed layer adhesion problem with first print profile

This is a charging station for 6 devices, It was designed around “GaN Apapter” Model # X00489ADHP SUBC charging block , w/ 8 ports found on Amazon. I printed it in Polymaker Fiberon PA6-CF20. &nbsp;

charging station

ASIA

Print Profile(3)

Description

Comment & Rating (28)

License

Related Models