AMS FRONT DASH

I was tired to turn the AMS lock arrows everytime I needed to open the AMS and change the spools.

So I designed the “AMS FRONT DASH” for a faster opening and to avoid to broke the original AMS lock arrows

I used PRUSA RED LIPSTICK combined with the BAMBU LAB WHITE ABS for the FRONT DASH with the AMS LOGO, that red is amazing!

Most of the time I print ASA and ABS, but you can use print the model with PLA or PETG as you like it.

You will find 4 different multicolor profiles based on the different LOGOS and designs.

1. AMS LOGO

2. P1P & P1S IN 2 DIFFERENT PLATES, JUST CHOOSE 1 OF THEM, BASED ON THE PRINTER MODEL YOU HAVE

3. X1C, IF YOU USE BAMBU LAB SILVER ABS AS MAIN COLOR , I ADVICE YOU TO PRINT THIS MODEL ON THE HIGH TEMPERATURE PLATE.

I USED AS WELL THE TEXTURED PLATE AND PERSONALLY I DIDN'T LIKE THE RESULT. ANYWAY TRY BOTH PLATES IF YOU HAVE AND CHOOSE THE MOST YOU LIKE.

4. NO LOGO , PRINTABLE WITH JUST 1 COLOR

_____________________________________________________________________________________________

NOTICE: REMIX ARE NOT ALLOWED

NOTICE: DO NOT POST ANY OF YOUR PROFILE

_____________________________________________________________________________________________

Give me a like and follow my page.

If you need help, just send me a message.