Search models, users, collections, and posts
Mini Lay's Chips
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
Open in Bambu Studio
Boost
444
1095
18
5
380
241
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Content has been automatically translated.
This is a food toy of mini Lay's potato chips, I saw someone made it with paper, so I thought, it should be easier with 3D printing.
It consists of three parts: the outer cylinder, the inner box, and the chips. There are about 25 chips in a box, so I modified the model to include 36 (in case of shortage).
A small magnet, 6mm in diameter, needs to be embedded at the top of the inner core and the top of the outer cylinder.
The decorative image on the outer cylinder is printed with a color inkjet printer. The image is as follows:
The chips are printed flat, so they need to be heated and rolled. I used a mini curling iron, the curvature is appropriate, the temperature is adjusted to 130°, and it can be clamped for a few seconds.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (18)