Antique Lamp
Print Profile(1)
Description
My new project on Crowdfunding (LINK)
Boost Me (for free)
Thanks for your support !
Antique Lamp by HX8
Filaments I used as showed in the images:
- Bambu PLA Basic Bronze
- Bambu PLA Basic Silver
- Bambu PLA Matte Black
- Bambu PLA Matte Scarlet Red
Socket I used: IKEA STRÅLA, 6 EURO, Link: https://www.ikea.com/at/de/p/strala-lampenaufhaengung-weiss-20366404/
Bulb I used: IKEA LUNNOM E14, 4.99 EURO, Link: https://www.ikea.com/at/de/p/lunnom-led-leuchtmittel-e14-200-lm-dimmbar-roehrenfoermig-klarglas-80516962/
This IKEA socket and bulb won't get hot, I was lighting it over 2 hours and the temperature just like my finger, so 35-38 c degrees, PLA will do it just fine.
No hardware or tools are needed. Bolts and nuts with 0.16mm layer height, other components 0.2mm are fine.
Important: Slow the print speed down for the shade !
The finished lamp height is exactly 40cm.
Due to the size limit, A1 Mini is not supported by default model, however you can try to down scale on your own, but I didn't test the tolerances.
Enjoy your print!
Check out my latest design:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (84)