impietro

cover

2023-11-25_s5jhsa7l8rrc.jpg

2023-11-25_11rowafk394m.jpg

2023-11-25_zrwm4rkmv3s7.jpg

plate_1.png

mart7.webp

Using this profile with a layer height of 0.20 mm, the print will come out well made. I set a 100% filling with ironing to make it sturdy and impact resistant.

0.2mm layer, 2 walls, 15% infill

mart6.webp

With a layer height of 0.16 mm, it will take longer to print but the aesthetic quality will be higher. Use a sturdy fill with a triangular texture to make it strong

0.16mm layer, 3 walls, 100% infill

mart3.webp

By using this profile with a layer height of 0.30 mm you are using a 0.6mm nozzle, printing will be fast and with a poor aesthetic result if you do not calibrate the settings well. I set a 100% filling with ironing to make it sturdy and impact-resistant and set the random splice to have no grooves in the various layers

0.6mm nozzle, 0.3mm layer, 3 walls, 100% infill

I designed and printed this belt hammer holder for my carpenter friends.

Print Profile(3)

Description

Comment & Rating (9)

License

Related Models

Hammer Holder

Print Profile(3)

Description

Comment & Rating (9)

License

Related Models