Print Profile(3)
Description
Can be used with or without a glare shield.
Depending on the color you print the glare shield, transparency effects will result.
------------------------------------
Please use LED bulbs only.
------------------------------------
The longest part to be printed has a length of 250mm.
The assembled lamp has a diameter of approximately 200mm and a height of 250mm.
------------------------------------
This is the same system as the "Pendant Lamp 01" – you can find a photo of the assembled lamp there.
------------------------------------
You will need an E26 or E27 socket with a screw ring and power cord/plug.
There are 2 print profiles:
- 1 for the lamp parts
- 1 for the optional glare shield
------------------------------------
To avoid warping, deactivate the AUX fan!
------------------------------------
Boost Me (for free)
👍If you like my design, I would appreciate a boost, a "like" and/or your make.
☕️☕️If you would like to support me with a tip⬇️⬇️:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)