Automatic Solder Tip Cleaner
Print Profile(1)
Description
If you're like me and want a quicker way of cleaning your solder tips (or just want to look cool) and also don't want to spend a lot of money then you're at the right place! I designed and built this for around $30! Note that the bezel template is meant for you to trace out the size bezel you need on a piece of metal. The metal isn't required, but makes the overall appearance look nicer. I have sinse upgraded it by adding a foot switch that can be found here: https://a.co/d/1CYCiyW. Instead of running the wires to the button run them to the switch.
You will need to purchase the following items:
-Female DC Power Jack
https://a.co/d/8S8UQew
-380 DC Motor
https://a.co/d/5b54DNG
-Flange Shaft Coupling*
https://a.co/d/0HllmMc
-3mm Shaft
https://a.co/d/eP7XqJT
-6700-2RS Bearings
https://a.co/d/9oDhS6M
-Tactile Push Button
https://a.co/d/8mwvuzs
-22ga Wire
https://a.co/d/eaielpp
-Rubber Belt
https://a.co/d/fNsJyZa
-25mm Brass Wire Brushes**
https://a.co/d/6RgUcoo
-3x2mm Magnets
https://a.co/d/5QLbnt3
-693ZZ Bearings
https://a.co/d/h8jFAMM
-6700-2RS Bearings
https://a.co/d/dDdMkAI
-Just about any 12VDC power adapter will work.
*Shaft diameter will depend on the diameter of your brush handle diameter.
**To save money you can make your own brushes using a cotter pin and a dental burr cleaner
https://www.aliexpress.us/item/2251832732435290.html
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)