Ballon-d'or - Free 3D Print Model

Search models, users, collections, and posts

Nils 3d druck

Art>Other Art Models

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 0% infill

Designer

2.2 h

1 plate

4.3(63)

0.2mm layer, 4 walls, 10% infill

14.6 h

1 plate

5.0(22)

0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill

3.5 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

469

727

108

2.3 k

1.2 k

Released

Description

Ballon-d'or

Category: Art

thingiverse

Comment & Rating (108)

@gemyannis

Boosted

Print Profile

0.2mm layer, 6 walls, 0% infill

I changed the profile, infill, walls etc, I added tree supports. It was printed scaled to 20 cm height.

@user_433463066

which settings did you use? It failed two times

@gemyannis

Boosted

Replying to @user_433463066 :

Use tree supports. Concentric top surface pattern, 4 top shell layers, 4 wall loops. I used 10% support cubic infill but I think lightning should work too. Also, adaptive layer height helps with the layer lines on top.

@gemyannis

Boosted

Replying to @user_433463066 :

I posted the profiles I used for 0.4 and 0.6 nozzles, I hope it helps.

@efon105

Boosted

Print Profile

0.2mm layer, 6 walls, 0% infill

cool

@nidraf_3d

Loved it 10/10

@AlexR33

Boosted

Print Profile

0.2mm layer, 4 walls, 10% infill

Excellent print The small supports under the ball are not easy to remove but with the small blue snips it works I spray painted it gold The finish is excellent Thanks

Show original

@stampe3d_dimi

Print Profile

0.2mm layer, 4 walls, 10% infill

Ottimo.

@CF_86

Print Profile

0.2mm layer, 6 walls, 0% infill

awesome print

(Edited)

@user_1988350795

Print Profile

0.2mm layer, 4 walls, 10% infill

amazing quality looks real highly recommend

@user_2918555167

Print Profile

0.2mm layer, 4 walls, 10% infill

Thanks for the print profile - my son loves it

Show original

@JohnnyBLM

Print Profile

0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill

very good.

@daddywolf79

Print Profile

0.2mm layer, 4 walls, 10% infill

the supports were tough to remove but the print looked amazing. thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ballon d'Or

Tigreloup

1.5 k

569

Ballon dog

ShadowTouch

2.4 k

451

2.4 k

1 k