Versatile Storage Rack - Enhanced Version - Full Series Printable (Stackable + Connectable)

Versatile shelf, can be assembled in various combinations

Sturdy shelf! Print once for long-term use, no deformation! Prevents top layer debris leakage (when used as a shoe rack)

I searched for a matching shelf for a long time but couldn't find a suitable one, so I decided to make my own

Reinforced crossbeams fully meet various daily scenarios

The configured size is the maximum stable print size for A1 mini: 178×178 mm, with a 2 mm skirt to prevent warping

Comes with 170 mm and 100 mm vertical rods, other lengths can be scaled and extended as needed

Note, the 170 mm vertical rod has two print versions: vertical print and horizontal print; the vertical print version has a tighter fit

The middle shelf can also serve as a base plate with legs

Special tips:

1. When printing the shelves with A1 mini, always clean the build plate first After printing is complete and cooled down for a bit, bend the protruding parts of the build plate from front to back, then grab the shelf to remove it, do not press on the print area with your fingers

   A1 mini has been tested to print 8 shelves continuously without issues

2. Do not print the vertical rods lying flat, they will not fit
3. Other printer models can scale up the print; after scaling up, you can reduce the Z-axis thickness of the shelf to save material
4. If you only store light small items normally, you can appropriately reduce the Z-axis thickness of the shelf for use

Hope this helps everyone